Vữa ngói phải được làm lại trước đó trong trường hợp nó bị ẩm trước khi chữa.Việc chà ron khi các mối nối bị ẩm sẽ gây ra rất nhiều tác động xấu. Nếu nghiêm trọng, có thể cần phải làm lại. Dưới đây nhà cung cấp phụ gia chà ron dẻo Kelin sẽ đưa bạn hiểu về
Grouting when the joints damp will cause a lot of negative effects. If serious, may need to rework. Below Kelin flexible grout additive supplier take you to understand about the condition and solutions for the joint damp.
1. Keep the room dry
2. The house needs airtight during construction
Construction must pay attention to the house airtight, keep the room clean and dry. In the process of construction must not come into contact with water, otherwise it will make the tile grout white, not solidified, and affect the subsequent use effect.
3. Be sure to check carefully after construction
Construction after the completion of the joint must be carefully checked to prevent the occurrence of being affected by damp. Usually, if the tile grout damp after curing, the surface brightness of the grout will be poor, and the color will look dim and fuzzy. When meet this kind of situation should be handled in a timely manner, otherwise it will lead to more serious consequence, it is more troublesome to construction again.
4. Keep the room dry after the construction
After grouting, in order to ensure that the joints do not become white and not easy to solidify due to excessive moisture, try to close the Windows to keep the room dry. If there is a dehumidifier in the home, it can be opened for 1-2 hours a day.